October

Fakuma 2018 in Germany: Haitian International presents electrical solutions

Haitian International Germany at Fakuma 2018 The future is electric Flexibility for our customers and extraordinary cost effectiveness continue to be the focus of Haitian International’s R&D and production management. The electric solutions of thei

July

Grand Opening of New Plant in Haitian Turkey

July 7th, 2018, Haitian Huayuan Machinery Middle East Co., Ltd. (or “Haitian Turkey”) opened its new plant at Velimese Corlu, Turkey. Mr. Yavus Eroglu, Chairman of Turkey Plastics Association, Top Management from Haitian International and nearly 200 cu

June

Balance between flexibility and productivity

The key to success in modern manufacturing processes is a perfect balance between flexibility and productivity while taking costs into account. Our solution: machine technologies “to the point”. This offers greater production efficiency while at the sa

May

HAITIAN INTERNATIONAL AT NPE 2018

Successful implementation of proven strategies – Innovation through “Technology to the Point” Absolute Haitian – sales and service partner in the U.S. and Canada will represent the latest machine solutions from Haitian and Zhafir +++ Zhafir JE Series m

GRAND OPENING OF NEW FACTORY OF HAITIAN HUAYUAN INDIA

New hall with 19,800 square meters of production area +++ As of now installation of servo-hydraulic injection molding machines up to 7,800kN +++ Extended service and support for customers in India On April 28, 2018, Haitian Huayuan India (“Haitian Indi

April

Haitian International 2017: What A Record Year!

More than RMB10 billion (more than USD 1.5 billion) in sales +++ More than RMB2 billion (approx. USD 300 million) in profits +++ More than 35,000 machines delivered worldwide (21 March 2018 – Hong Kong) Haitian International Holdings Limited (“Haitian

February

Large Commonweal Project of Beilun Ningbo – Haitian Cultural & Sports Center Was Born!

The commencement ceremony of Beilun District’s large commonweal project – Haitian Cultural & Sports Center which is located at Changshan Community, Xiaogang Street, Beilun District, was held on the morning of February 2, 2018. All the middle-level

November

Haitian International presents its two brands in IPF 2017

The 5-day even Japan International Rubber & Plastics Machinery Fair (IPF) which is held once every three years has been successfully concluded in Tokyo of Japan on October 28, 2017.   As one of the top three trade fairs for rubber and plastics

August

Half-year result for 2017: Record sales again and increasing demand for Technology to the Point

Half-year record amount (converted into euros) of approximately € 650.2 million. +++ More than 18,000 machines delivered in the first half year +++ Consistent focus on electrics in small tonnages and two-platen technology in large tonnages +++ Two-plat

October

Haitian anniversary celebration: 50 years of entrepreneurial brilliance

50 years of growth through entrepreneurial brilliance +++ Pioneering role in the injection molding industry +++ 10 years of Haitian International +++ 10 years of Mars Technology, the world’s bestselling injection molding machine technology Haitian Inte

Consistent development of the innovation strategy “Technology to the Point”

Faster, higher, further – more variable, more favorable, better: The demands of the times change with ever greater speed. For the plastics processing industries as well, flexibility is one of the most important key factors of tomorrow. This is why Hai

Exhibits at K 2016

At the K 2016 Trade Fair, Haitian International will present highly efficient solutions for achieving the perfect balance between productivity and flexibility at best costs under its strategy of “Technology to the Point”.   The total of four exhib

August

Interim Results 2016: Product innovation and consistent enhancement of operational efficiency

Stable revenues at 3,860.9 million RMB +++ high level of adjusted profit attributable to shareholders of the Company with 8.6% growth to 712.8 million RMB +++ Gross profit margin improved consistently from 32.3% in 2015 to 34.1% in 2016 +++ net profit

July

K 2016: Flexibility with “Technology to the Point”

At the K-Show 2016, Haitian International presents established bestsellers from its successful “Technology to the Point” market strategy +++ European launch of the fully electric Zhafir Venus II Series/„p“ +++ Two-platen Haitian Jupiter II Series with

June

Grand Opening of second factory of Haitian International Germany

Grand Opening celebrated with 680 guests from 15 countries +++ New hall with 7,500 square meters of production area +++ As of now installation of servo-hydraulic injection molding machines up to 30,000 kN +++ Extended service and support for customers

April

Flexibility is an important future challenge for production processes

Haitian International at Chinaplas 2016 +++ Clear position on smart manufacturing and Industry 4.0 +++ Booth E2J01 in Shanghai Some 26,000 machines sold, the second-best exports figures in our history, sales increases of almost 50% in the all-electric

Haitian Jupiter II Plus

The Haitian Jupiter II Plus with two-platen technology: Received the Ringer’s Technical Innovation Award last month. Compact and space-saving design, with lots of room for the mold, modified for the automotive industry, logistics, white goods etc. Sinc

Haitian International presents “Technology to the Point”

Chinaplas 2016, booth E2J01: Haitian and Zhafir show off “Technology to the Point” +++ premiere of Haitian two color machine Series “Iapetus” with two-platen-technology Haitian International, the largest injection molding machine manufacturer in the wo

March

Haitian International 2015: Excellent results amid tough business environment

Stable sales and record profits amid tough business environment + + + Company reaches RMB 7.34 billion turnover with 26,000 delivered machines +++ Increased sales for electrical and two-platen-solutions + + + Sustainable growth with new manufacturing s

October

Haitian International Raises its Brand Visibility on Times Square, New York

Themed as “66 Chinese brands expanding into international markets”, a large international promotion campaign for Chinese brands was initiated on New York’s Times Square, on October 1st and 2nd, 2015, which marks the 66th birthday of the People’s Republ

Re-Designation of Prof. Helmar Franz

Prof. Franz retires from his operational positions at Haitian International   After completing 10 years of service to Haitian International, initially as Vice President, and subsequently as Executive Director and Chief Strategy Officer, on August

Interim Results 2015: Stronger demand for all-electric and two-platen solutions

Sales revenues of $ 603.2 million +++ Growing success in strategic shift to all-electric and two-platen machines +++ Two-platen Jupiter Series achieves 64.2 % growth +++ All-electric Venus Series achieves 25.9 % growth +++ The Mars Series topped the sa

July

Haitian International presents “Technology to the Point” at Chinaplas 2015

The Chinaplas 2015 which lasted for four days from May 19 until 23, 2015 has attracted more than 120,000 visitors in total, despite bad weather in Guangzhou. Of the total visitors’ number, more than 35,000 of them were from overseas, which accounts for

May

Zhafir Plastics Machinery opens new plant in Ningbo, Chunxiao, China

18th of May 2015 marks yet another milestone in Haitian International‘s and its premium brand Zhafir success story: Zhafir Plastics Machinery is opening the first section of its new Chinese plant in Chunxiao, a suburb of Ningbo. The Grand Opening was a

April

Haitian International confirmes again its Leadership

Growth continues: In 2014, Haitian again sets a new record in history + + + Sale of Mars surpass 120,000 machines +++ New record also for export sales with an increase by 13.1 % Haitian International, one of the world’s largest manufacturers of plastic

February

Technology to the Point at NPE 2015

Absolute Haitian – sales and service partner in the U.S. and Canada will represent the machine solution of Haitian and Zhafir +++ Smaller model sizes in two-platen technology +++ Wide platen option +++ North American premiere of the 730 U.S. ton Jupite

November

Haitian International Exhibits on IPF Japan 2014

The IPF Japan (“International Plastics Fair), which takes place once every 3 years, was commenced on October 28, 2014 in Tokyo, Japan. This fair has attracted around 770 leading suppliers from the plastics and related industries, most of which are from

September

Interim Results 2014: Haitian International’s dynamic growth continues

New records for revenue and profit +++ 14% growth in exports +++ Fully electric Venus achieves 49.7% growth +++ Continued success by focusing consistently on the customer The group of companies achieved sales revenues to the tune of RMB 3,810.60 millio

July

Create and Extend Advantage through Communication

Haitian’s Open House and New Product Release in Guangzhou Factory As one of the most important domestic markets for injection molding machines, Guangdong has attracted numerous well-known injection molding machine manufacturers and medium-and-high end

May

Chinaplas 2014 Review

The 28th International Exhibition for Plastics and Rubber Industries (Chinaplas 2014) has been successfully completed on April 26 in Shanghai. As Asia’s largest plastics and rubber fair and a traditional gathering platform for China’s plastics processi

April

Haitian International continues its success

Turnover, exports, profit: Haitian sets new records in all areas for fiscal year 2013 + + + Sale of Mars machines exceeded 100,000 units + + + Success guaranteed through innovation, high cost efficiency, and product development with a consistent focus

October

Haitian International posts double-digit growth in turnover and profits in the first half of 2013

Second-best half-yearly earnings in the company’s history +++ 13,600 units sold +++ turnover of 3,620.6 million RMB +++ net profits increase by 17.0% +++ export business at new record level Half-yearly report as of June 30, 2013 Haitian International H

First Jupiter II Series installed in Belgium

108.51亿人民币 2018年度总收入 2017年度总收入为101.86亿人民币 32.31亿人民币 2018年度出口总收入 2017年度为30.51亿人民币 6,390名员工全球雇员稳定 35,000台 2018年度机器产量 2017年度为35,000台 80万平方米 生产面积   130万平方米 总面积

Production moved back to Sweden

Sledges, snowboards … The Swedish company STIGA Sports is among the world’s top suppliers of leisure and winter sports articles. In order to organize the production of plastic sledges more efficiently, the entire manufacturing process was designed anew

Haitian International’s Medium-Term Strategy

In the medium term, the company is focusing on fully-electric machine designs and double-platen technology +++ Right next to Ningbo, two new manufacturing plants are under construction for this purpose with a total surface area of 450,000 m². The inten

FULLY-ELECTRIC VENUS SERIES HAS BEEN UPGRADED TO MEET MARKET CONDITIONS

+++ NEW ZHAFIR VENUS II SERIES NOW AVAILABLE UP TO 5,500 KN +++ MORE FLEXIBILITY WITH UP TO 8 INJECTION UNITS +++ INCREASED INJECTION PERFORMANCE UP TO 350 MM/S +++ PACKAGING VERSION LIVE AT THE K SHOW With the new Generation II, Zhafir Plastics Machin

September

Decennial Celebration for Foundation of Brazil Branch

At 3:28, the afternoon of June 18 (Brazil time), the flag is flying in the place where Haitian Brazil is located in Sao Roque, Sao Paulo, Brazil, , witnessing the decennial ceremony for Haitian Brazil. Mr. Zhang Jianming, Chairman of the Board of Haiti

July

Leadership has many Dimensions

Under this motto Haitian International is showcasing four live exhibits at the K-2013 trade show and continues to focus on suitable customer solutions at fair conditions. The success of the customer has always been pivotal for Haitian International. We

The new Haitian Jupiter II Series – compact and energy efficient

Completely revised machine design, more precision and higher performance, more applications possible +++ Two-platen technology with from 12,000 to 66,000 kN in the smallest of spaces +++ World premiere of the 5,500 kN Jupiter at the K-Trade Show +++ Sm

Haitian International responds to current trends in plastics processing

Energy-efficient drives are becoming standard +++ Mass production favors full electric machines +++ Economy versions are on the march +++ Standard machines are conquering high-tech production cells +++ Haitian will expand its worldwide communication ne

Fully electric Venus continues to gain ground – now available up to 5,500 kN

New Zhafir Venus II Series has been comprehensively optimized +++ More dynamic motors +++ Increased injection performance +++ More flexibility with up to 8 injection units +++ Shorter set-up times +++ New clamping forces up to 5,500 kN +++ Live demonst

May

Premiere at Chinaplas 2013

Haitian International is showcasing its new two-platen Series and the largest all-electric machine currently available. At this year’s Chinaplas in Guangzhou Haitian International presents the latest models of the second machine generations of “Zhafir”

April

Haitian International sustains profitability in a difficult market environment

Slight decrease in sales to 6.3 Billion RMB but clear winner in Asia One of the world’s largest manufacturers of injection molding machines announced its annual results for the year ended 31 December 2012: Haitian International (Stock-code: 1882) repor

October

Haitian International presents a new injection moulding machine generation for the first time in Europe

The latest injection moulding machines from the Haitian and Zhafir range will be presented at Fakuma 2012 in Hall A6, Stand 6107. On show will be the new machines with automated medical and packaging application. “The machines’ Premiere in China was ve

Positive interim results for 2012 confirm Haitian International’s sustainable strategy

On 21st August 2012 Haitian International Holding Ltd. announced their interim results for 2012. Thus the Haitian Group could show a sales turnover of 3,179.1 million RMB. “An outstanding half-year result“ was the conclusion of Mr. Zhang Jianming, Exec

“The overall concept is the star”

With innovative solutions Haitian International want to defy the general cost pressure At Fakuma 2012, Haitian International Ltd. wants to set new standards with regard to efficient production and quantity costs. For the first time in Europe, in Hall A

August

Zhafir is strengthening its team

Key positions of Director Operations and Product Manager have been filled Zhafir Plastics Machinery GmbH was established more than 5 years ago and the team in Ebermannsdorf has continued to grow starting with the construction of the manufacturing build

May

Energy saving solutions and innovations

Haitian International at Chinaplas 2010, Booth No.: 4.1J21 Based on the customer benefits, innovation with sustainability is always on the top of the company’s management agenda. In Chinaplas 2011, Haitian Plastics Machinery will show the Pallas series

Sustainability and Innovation Drives New Record

30,000 machines delivered and 82.8% turnover increasing in 2010 –– Haitian International is significantly expanding market leadership around the world. One of the largest producers of injection molding machines announces its annual results for 2010: H

March

New record for Haitian International

30,000 machines delivered in 2010 – the Group is significantly expanding market leadership around the world. One of the largest producers of injection molding machines announces its annual results for 2010: Haitian International (Share Code: 1882) is a

November

A next-generation machine makes its debut

Zhafir Plastics Machinery introduces the new Mercury Series at the K 2010 – engineering “Made in Germany” 200 selected visitors were already able to take a look at the prototype of the Mercury Series in November of 2009 – Zhafir Plastics Machinery, the

Trust through Communication

Haitian International is showcasing market-driven products at K 2010 and is confidently in dialog with customers In the first half of 2010 Haitian International sales were again significantly above pre-crisis levels. +76% in the domestic Chinese market

Record sales thanks to a customer-oriented product strategy

Haitian International reports record sales and profits in the first half of 2010. The economic rebound has continued particularly in the growing markets in Asia, Eastern Europe and South America in the first half of 2010 as well. The business of the “H

September

Haitian International on course to K 2010 at a high speed of innovation

The Group is optimally positioned for the global markets and is demonstrating its high speed of innovation at the K-Show 2010 with its broadly diversified products portfolio. The Haitian group offers the appropriate machines for all needs with extremel

March

Positive Trend in the First Two Quarters of 2009

Haitian International Ltd. announces figures for the first half of 2009. The sales figures of Haitian International Holdings Ltd. have developed positively in the first two quarters of 2009 country to the trend in the global market. With RMB 1.37 billi

Starting signal for the new Zhafir manufacturing plant in Ebermannsdorf

From now on the all-electric “Venus” machines will be produced also in Germany The parent company of Zhafir Plastics Machinery in Germany, Haitian International Holdings Ltd., invested around 10 million Euros into the Ebermannsdorf location close to th

Zhafir opens new horizons with the “Mercury Series”

The first prototype meets the high expectations of development There have been many attempts in Europe and Japan in recent years to develop sophisticated yet economic all-electric machines. Significant innovations have failed to appear to date. Most fa

Haitian Europe shifts its place of business to Germany

Haitian Europe, the European subsidiary of Haitian International Holding Ltd., will operate out of Germany starting June 2010. Target is to realign itself organizationally and with regard to infrastructure with this relocation to optimally position the

August

Haitian International Announces 2009 Interim Results

Remains profitable with sales totaling RMB1.37 billion amid tough business environment (19 August 2009 – Hong Kong) Haitian International Holdings Limited (“Haitian International” or “the Company”, together with its subsidiaries and associates collecti

June

Zhafir Plastics Machinery invested at its German location

Roofing ceremony for the new production hall in Ebermannsdorf, Oberpfalz On June 18th the injection molding machine manufacturer Zhafir Plastics Machinery held the topping out ceremony for the 4,300 square meter production hall after a construction per

April

Haitian International Announces 2008 Annual Results

Sales totals to RMB3.7 billion amid challenging business environment (1 April 2009 – Hong Kong) Haitian International Holdings Limited (“Haitian International” or “the Company”, together with its subsidiaries and associates collectively known as “the G

January

Haitian International celebrates a record

The Group built one of the largest machine production halls in the world in Ningbo. (Ningbo) The Chinese global market leader expanded further and to date has invested over 50 million Euros (450 million RMB) in the expansion of its production facilitie

November

Zhafir: Fully electric concepts score in Europe

Swedish processor expands its production with the “Zhafir Venus Series”. The highly specialized Swedish injection molding company, Holmgrens Plast AB in Gnosjö, equipped their machine outfit in 2008 with the fully electric “Zhafir Venus series” and app

Progressive technology at excellent prices

“Haitian Mars” and “Zhafir Venus” in perfect harmony with the customer segment Global market leader Haitian International Holdings Ltd is again emphasizing the positioning of the group in international competition with the market launch at the Fakuma t

HT Deutschland: Successful with the “Haitian Mars Series”

Swabian processor Mayer GmbH changes over to the “Energy Saver”. HT Deutschland announces significant sales and marketing success with regard to the innovative, energy saving and well priced “Haitian Mars Series”. The long-established company Mayer Gmb

August

Haitian International Announces 2008 Interim Results

Sales increased by 9% amid weakening business environment Gross Profit up 3.4% to RMB 568 million Financial Highlights For the six months ended 30 June (RMB Mn) 1H 2008 1H 2007 Change % Sales 2,060.0 1,889.1 +9.0 Gross Profit 567.9 549.2 +3.4 Profit At

July

“Zhafir Venus Series” rated “excellent”

The injection molding machine series satisfies the “Plastpol 2008” jury on all points (Kielce/Poland) To end the polish International Fair of Plastics Processing Plastpol (May 27-30, 2008) the competitive jury of the exhibition management in Kielce awa

June

Haitian International Announces 2007 Annual Results

Profit Attributable to Equity Holders up 26.1% to RMB568.4 million Financial Highlights For the year ended 31 December (RMB Mn) 2007 2006 Change (%) Sales 3,824.9 3,175.7 +20.4 Gross Profit 1,120.8 893.7 +25.3 Gross Profit Margin 29.3% 28.1% +1.2ppts P

Haitian Europe takes over Italian marketing

Cazzago San Martino. By mutual agreement, Haitian Europe S.R.L. will separate from their Italian distribution and service partner, HT Italy, with effect from 30.6.2008. This measure follows the strategic reorientation of the parent company, Haitian Int

October

Now Haitian is represented in Germany

Haitian Europe has launched HT Deutschland GmbH Haitian Europe has broadened its presence with HT Deutschland GmbH. As an exclusive marketing and service partner, this authorized sales and service agency is operative since July under the leadership of

New Product Portfolio

The brand names ‘Haitian’ and ‘Zhafir’ can, from now on, provide solutions for practically all applications At the K-Show 2007 in Düsseldorf, Haitian International will for the first time be presenting the new ‘Haitian Mars Series’ with its innovative

Ningbo Haitian aims for consolidation of its global market leadership in the injection moulding machine segment

Ningbo Haitian Group Co., Ltd. of Ningbo, China, wants to strengthen and expand its leading position in the international market for injection moulding machines. With an output of about 14,000 machines in 2005, Ningbo Haitian boosted its established po

September

The Haitian International Holdings Ltd. bundles synergies

Management targets to become world leaders with the ‘Haitian’ and ‘Zhafir’ brands (19-09-2007, Amberg) Since the very successful listing of the Haitian International Ltd. in December 2006 it represents the entire injection molding business of the Ningb